Recent PUBLICATION LIST of Deformable Media Engineering
Research Group
ISI papers |
E.M. Cojocaru, D.
Raducanu, A.N Vintila, S.S. Alturahihi, N.
Serban, V.D. Cojocaru, Influence of
ageing treatment on microstructural and
mechanical properties of a solution treated
UNS S32750/EN 1.4410/F53 Super Duplex
Stainless Steel (SDSS) alloy,
Journal of Materials Research and Technology,
Volume 9, Issue 4, Pages 8592-8605; DOI:
10.1016/j.jmrt.2020.05.127 |
E.M. Cojocaru, D.
Raducanu, S.S. Alturahihi, A. Nocivin, G.
Coman, V.D. Cojocaru, Influence of
isochronal treatments on microstructure and
mechanical properties of solution treated
UNS S32750 SDSS alloy specimens,
Journal of Materials Research and Technology,
Volume 9, Issue 4, Pages 7870-7879; DOI:
10.1016/j.jmrt.2020.05.056 |
M.L. Angelescu, E.M.
Cojocaru, N. Șerban, V.D. Cojocaru,
Evaluation of hot deformation behaviour of
uns s32750 super duplex stainless steel (Sdss)
alloy, Metals, Volume 10,
Issue 5, Article number 673; DOI:
10.3390/met10050673 |
M. Popa, E. Mihalache, V.D. Cojocaru, C. Gurău, G.
Gurău, N. Cimpoeșu, B. Pricop, R.I. Comăneci, M. Vollmer, P. Krooß, T.
Niendorf, L.G. Bujoreanu, Effects of Thermomechanical Processing on
the Microstructure and Mechanical Properties of Fe-Based Alloy,
Journal of Materials Engineering and Performance, Volume 29, Issue 4,
Pages 2274-2282; DOI: 10.1007/s11665-020-04609-z |
E.M. Cojocaru, D.
Raducanu, A. Nocivin, I. Cinca, A.N. Vintila,
N. Serban, M.L. Angelescu, V.D. Cojocaru,
Influence of aging treatment on
microstructure and tensile properties of a
hot deformed UNS S32750 super duplex
stainless steel (SDSS) alloy,
Metals, Volume 10, Issue 3, Article
number 353; DOI: 10.3390/met10030353 |
D. Raducanu, V.D. Cojocaru, A. Nocivin, I. Cinca, N.
Serban, E.M. Cojocaru, β-Phase Stability of Two Biomedical β-Titanium
Alloys During Severe Plastic Deformation, JOM, Volume 72,
Issue 8, Pages 29372948; DOI: 10.1007/s11837-020-04235-z |
ISI papers |
D. Raducanu, V.D. Cojocaru, A. Nocivin, I. Cinca, N. Serban, E.M. Cojocaru, Surface Modifications of Biomedical Gum-Metal-Type Alloy by Nano SurfaceSevere Plastic Deformation, JOM, Volume 71, Issue 11, Pages 4114-4124; DOI: 10.1007/s11837-019-03667-6 |
R. Bolmaro, A.C. Parau, V. Pruna, M.A. Surmeneva, L.R. Constantin, M. Avalos, C.M. Cotrut, R. Tutuianu, M. Braic, V.D. Cojocaru, I. Dan, S. Croitoru, R.A. Surmenev, A. Vladescu, Investigation of cast and annealed Ti25Nb10Zr alloy as material for orthopedic devices, Journal of Materials Research and Technology, Volume 8, Issue 4, Pages 3399-3414; DOI: 10.1016/j.jmrt.2019.06.006 |
D. Răducanu, V.D.
Cojocaru, N. Șerban, C. Trișcă-Rusu, M.G.
Necula, R.A. Mudrac, I. Dan, A. Nocivin, I.
Cinca, Processing and properties of a
new biodegradable Mg−Zn−Ca−Zr alloy /
Verarbeitung und Eigenschaften einer neuen
biologisch abbaubaren Mg−Zn−Ca−Zr-Legierung,
Materialwissenschaft und
Werkstofftechnik, Volume 50, Issue 5,
Pages 553-564; DOI: 10.1002/mawe.201800232 |
D. Raducanu, V.D. Cojocaru, A. Nocivin, I. Cinca, N. Serban, E.M. Cojocaru, Contributions to Mechanical Characteristics Improvement of Some Biomedical TNTZ Alloys by Adding Fe, Si, and O: A Comparative Study, JOM, Volume 71, Issue 1, Pages 264-271; DOI: 10.1007/s11837-018-3091-x |
N. Serban, V.D. Cojocaru, M.L. Angelescu, D. Raducanu, I. Cinca, A.N. Vintila, E.M. Cojocaru, High temperature deformation behaviour of an industrial S32760/1.4501/F55 super duplex stainless steel (SDSS) alloy, Metallurgia Italiana, Volume 111, Issue 5, Pages 41-48 |
ISI papers |
V.D. Cojocaru, N.
Șerban, M.L. Angelescu, E.M. Cojocaru, I.
Cinca, D. Răducanu, A.N. Vintilă,
Effect of short duration solution treatment
at temperatures below 1000 °C on σ-phase
precipitation in a super duplex stainless
steel alloy / Wirkung einer kurzen
Lösungsglühdauer bei Temperaturen unter 1000
°C auf die Ausscheidung von σ-Phasen in
einem Super-Duplexstahl,
Materialwissenschaft und Werkstofftechnik,
Volume 49, Issue 5, Pages 530-537; DOI:
10.1002/mawe.201700280 |
M.L. Angelescu, V.D.
Cojocaru, N. Șerban, E.M. Cojocaru,
Evaluation of optimal forging temperature
range for an industrial UNS S32750 SDSS
alloy using SEM-EBSD analysis,
Metals, Volume 8, Issue 7, Article
number 496; DOI: 10.3390/met8070496 |
V.D. Cojocaru, N.
Șerban, Effects of solution treating
on microstructural and mechanical properties
of a heavily deformed new biocompatible Ti-Nb-Zr-Fe
alloy,Metals, Volume 8, Issue
5, Article number 297; DOI:
10.3390/met8050297 |
V. Mitran, V. Dinca, R.
Ion, V.D. Cojocaru, P. Neacsu, C.Z. Dinu, L.
Rusen, S. Brajnicov, A. Bonciu, M. Dinescu,
D. Raducanu, I. Dan, A. Cimpean,
Graphene nanoplatelets-sericin
surface-modified Gum alloy for improved
biological response, RSC Advances,
Volume 8, Issue 33, Pages 18492-18501; DOI:
10.1039/c8ra01784k |
ISI papers |
A. Nocivin, V.D.
Cojocaru, D. Raducanu, I. Cinca, M.L.
Angelescu, I. Dan, N. Serban, E.M. Cojocaru,
Finding an Optimal Thermo-Mechanical
Processing Scheme for a Gum-Type Ti-Nb-Zr-Fe-O
Alloy, Journal of Materials
Engineering and Performance, Volume 26,
Issue 9, Pages 4373-4380; DOI:
10.1007/s11665-017-2863-8 |
V.D. Cojocaru, D.
Răducanu, M.L. Angelescu, A.N. Vintilă, N.
Șerban, I. Dan, E.M. Cojocaru, I. Cinca,
Influence of Solution Treatment Duration
on Microstructural Features of an Industrial
Forged UNS S32750/1.4410/F53 Super Duplex
Stainless Steel (SDSS) Alloy, JOM,
Volume 69, Issue 8, Pages 1439-1445; DOI:
10.1007/s11837-017-2372-0 |
P. Neacsu, A.I. Staras,
S.I. Voicu, I. Ionascu, T. Soare, S. Uzun,
V.D. Cojocaru, A.M. Pandele, S.M. Croitoru,
F. Miculescu, C.M. Cotrut, I. Dan, A.
Cimpean, Characterization and in vitro
and in vivo assessment of a novel cellulose
acetate-coated Mg-based alloy for orthopedic
applications, Materials,
Volume 10, Issue 7, 22 June 2017, Article
number 686; DOI: 10.3390/ma10070686 |
V.D. Cojocaru, N.
Șerban, M.L. Angelescu, M.C. Cotruț, E.M.
Cojocaru, A.N. Vintilă, Influence of
solution treatment temperature on
microstructural properties of an
industrially forged UNS S32750/1.4410/F53
super duplex stainless steel (SDSS) alloy,
Metals, Volume 7, Issue 6, 7
June 2017, Article number 210; DOI:
10.3390/met7060210 |
D. Raducanu, V.D.
Cojocaru, A. Nocivin, D.M. Gordin, I. Cinca,
Microstructural features and local
properties evolution in a heavy plastic
deformed Ti-29Nb-9Ta-10Zr (wt%) alloy,
Materials Science and Engineering A,
Volume 689, Pages 25-33; DOI:
10.1016/j.msea.2017.02.039 |
C.M. Cotrut, A.C. Parau,
A.I. Gherghilescu, I. Titorencu, I. Pana,
V.D. Cojocaru, V. Pruna, L. Constantin, I.
Dan, D.M. Vranceanu, A. Vladescu,
Mechanical, in vitro corrosion resistance
and biological compatibility of cast and
annealed Ti25Nb10Zr alloy, Metals,
Volume 7, Issue 3, Article number 86; DOI:
10.3390/met7030086 |